1. SDC Cable: Connects to DJI Power 1000 or DJI Power 2000.
2. Car Charging Terminals (including positive and negative terminals): Connect to a car battery.

1. Recharge mode: Recharge the power station and the expansion battery.
2. Charge mode: Supply power to the car battery with the power station and the expansion battery to prevent battery drain.
3. Auto mode: Automatically determines whether to enter Recharge mode or Charge mode based on the user-set car battery voltage.

1. The 1kW Super Fast Car Charger is suitable for 12V or 24V car systems. The input voltage of the car charging terminals must not exceed 45 V.
2. After installation in the car, organize and secure the wiring, and ensure all terminal screws are fixed, before driving the vehicle.
3. When installing the cables, it is recommended to first secure the cables of the 1kW Super Fast Car Charger, and then connect the fuse and cables of the car battery, in order to avoid short circuits, which could result in damage to the equipment.
4. The 1kW Super Fast Car Charger is not water or dust-resistant. Take precautions against any exposure to water or dust during installation.

DJI Power 1kW Super Fast Car Charger is compatible with most cars equipped with either a 12V or 24V battery system. The power output of your car can be calculated using the formula: Battery Voltage × Alternator Current. Typically, small vehicles such as sedans, SUVs, and pickup trucks use a 12V system, while medium-sized trucks use a 24V system. You can find the alternator current of your specific vehicle model online or measure it directly.

1. SDC Cable: Connects to DJI Power 1000 or DJI Power 2000.
2. Car/Solar Charging Port: Connects to a car battery or expands to an MC4 connector for connecting solar panels.
3. MC4 Solar Panel Cable: Connects to solar panels.
4. The additional XT60 DC OUT port is for internal testing purposes only and has no practical function.

1. Recharge mode: Recharges the power station and the expansion battery.
2. Charge mode: Supplies power to the car battery with the power station and the expansion battery to prevent battery drain.
3. Auto mode: Automatically determines whether to enter Recharge mode or Charge mode based on the user-set car battery voltage.

1. The 1.8kW Solar/Car Super Fast Charger is suitable for 12V or 24V car systems. The input voltage of the car charging terminals must not exceed 45 V.
2. After installation in the car, organize and secure the wiring, and ensure all terminal screws are fixed, before driving the vehicle.
3. The 1.8kW Solar/Car Super Fast Charger is not water or dust-resistant. Take precautions against exposure to water or dust during installation.

1. The maximum input voltage of the MC4 Solar Panel Cable is 60 V, and the maximum power is 1200 W.
2. When connecting the Car/Solar Charging Port to solar panels, the maximum input voltage is 45 V, and the maximum power is 600 W. Pay attention to the series and parallel configuration of the solar panels to avoid exceeding port limits.
3. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.

Yes.
By connecting DJI Power 1000 to DJI Power Dongle, you can check the status of the Super Fast Chargers in the DJI Home app.
DJI Power 2000 can connect to the network directly. Once online, the status of the Super Fast Chargers can also be checked in the DJI Home app.